RC-6015 12v 50ma bulbs

[Esemdesign]

Anywhere on line I can buy these? Need 2
Thanks, Steve

[Mackey]

Anywhere on line I can buy these? Need 2
Thanks, Steve

You need 12V 50mA 5.5mm diameter bulbs with leads. They look exactly like the original when you add a little white shrink wrap to them. Miniatronics is the brand I use. They can be found here:

http://www.miniatronics.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=M&Product_Code=18-024-10&Category_Code=1_3&Product_Count=2

[Esemdesign]

Both clocks I have here have black wires, did some have white?

[Esemdesign]

Do you know if they will ship to the UK?

[Mackey]

Both clocks I have here have black wires, did some have white?

I have never seen any of the later model panasonics (RC6030, 6040, 6025, 6010,6015) with white wires to the bulbs. The white shrink wrap is only about 8mm of white shrink wrap tubing near the blub.

Do you know if they will ship to the UK?

Don't need to.... the store locator says they have a store in England

SMALE SUNNINGWELL COMMAND CONTROL LTD 10 SUNNINGWELL VILLAGE NR ABINGDON, OXON, ENGLAND OX13 6RB 44-0 1865-730455

Good Luck !

[Esemdesign]

The bulbs arrived this morning.
Both clocks now fully working.
BIG thanks to Mackey for all your help and advice.

[beatle]

I know this is an old thread, but has anyone bought these in bulk (seems like you can only buy packages of 10) and doesn't have 10 clocks to install them in? I could use one to repair a 6015 I just picked up, just don't feel like effectively paying $25 for one. Would obviously pay someone for their bulb and trouble.

[Mackey]

I know this is an old thread, but has anyone bought these in bulk (seems like you can only buy packages of 10) and doesn't have 10 clocks to install them in? I could use one to repair a 6015 I just picked up, just don't feel like effectively paying $25 for one. Would obviously pay someone for their bulb and trouble.

I'll hook you up just for being a new member.
Look for a private message from me.

[beatle]

Hey, that's awesome! I see your message, but for the life of me I cannot reply. The Reply link does nothing. I'll try sending you an email via the Contact Us link.

[Mackey]

Hey, that's awesome! I see your message, but for the life of me I cannot reply. The Reply link does nothing. I'll try sending you an email via the Contact Us link.

Man, Thanks for letting me know this. I evidently bungled up some settings on the forum. I think it's working now. If you don't mind, please check it out if you get a chance.
You're bulbs will be in the mail next week.
Thanks!

[beatle]

I'm able to reply to PMs now which is good. I'll look to see if I get an email when someone replies to this thread now.

[Mackey]

Hope it works out

[beatle]

All good here. Getting notifications on this thread as well as PMs.